KWIK SLAB system installed in existing asphalt pavement.
|
FAQ's
How
are the precast slabs leveled after they are placed?
Any leveling required is accomplished through use of plastic leveling
shims, grout leveling pads, or by “mud jacking” with Uretek
Deep Injection Process.
Refer to Design Data Sheet
4
Can
the KWIK SLAB be connected to an existing slab?
Yes. Slots are saw cut into the existing pavement then connected to
the KWIK SLAB by embedding the male end bars with high-strength grout.
Refer to Design Data Sheet
3
Can
the KWIK SLAB accommodate utilities and manhole covers?
Yes. The KWIK SLAB can be precast with openings, core drilled or saw
cut to oversized holes to accommodate utilities and manhole covers.
Refer to Design Data Sheet
2
Can the
KWIK SLAB system account for curvature and super elevation of the roadway?
Yes. The KWIK SLAB system can be designed to account for this.
What
sizes are the slabs available in?
The KWIK SLAB can be designed to different sizes to accommodate your
project. For design assistance and procuring the Kwik Joint steel couplers, please contact any Kwik Slab, LLC office.
Back to Top
|
